[fabiang]

Hi, I install VIOS and create a viosclient, the first issue was that i have created a tsm_vg with a 100G and stogvg_tsm with 80 G from the rootvg_client that have 1 Tera. with the following comands

mklv -lv stogvg_tsm rootvg_client 80G

mkvdev -vdev stogvg_tsm -vadapter vhost2 -dev vtsm1

then I asociated these partition to two vhost, the problem is whe i start the partition client, I have only rootvg with a disk of 10G, and is the tsm_vg i cant see stogvg_vg and I dont know where are the other 90G.-
Is there any procedure add another LV to a partition client.-

Thanks.-

Fabian

[schnupfy]

Hello Fabian,

it is hard to figure out what you want. You only exportet one logical Volume with 80GB that you should see on your dynamic lpar. If you want to export more, then just create another one.

Cheers,
Marcus