[vpj01]

Hi,

I have the fowllowing error. Please advice me of a possible solution. I have already changed the fcs adapter, updated the new card address to zoning. After cfgmgr, it was fine. But error reappeared again after 1hr. This time it also has multiple hdisk error. The machine to SAN which is then linked to SHARK.

LABEL: FSCSI_ERR4
IDENTIFIER: 3074FEB7
Date/Time: Sun Dec 14 23:47:24 BEIS
Sequence Number: 59666
Machine Id: 0036D75C4C00
Node Id: hkgi12
Class: H
Type: TEMP
Resource Name: fscsi0
Resource Class: driver
Resource Type: efscsi
Location: U1.9-P1-I1/Q1
Description
ADAPTER ERROR
Probable Causes
ADAPTER HARDWARE OR CABLE
ADAPTER MICROCODE
FIBRE CHANNEL SWITCH OR FC-AL HUB
Failure Causes
ADAPTER
CABLES AND CONNECTIONS
DEVICE
Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES
CHECK CABLES AND THEIR CONNECTIONS
VERIFY DEVICE CONFIGURATION

Thank you.

Regards,

Vincent

[ross.mather]

Before you go charging off and changing adapters did you follow the advice in the error:

PERFORM PROBLEM DETERMINATION PROCEDURES

CHECK CABLES AND THEIR CONNECTIONS
VERIFY DEVICE CONFIGURATION

What do you get with lsattr -El fscsi0 and lsattr -El fcs0 commands. did you run diag and check the FCS?