[ritesh1117]

hi friends,

I have follwoing configuration. ..

LPAR On sys 1 :

Processor mem HBA Eth Disk
LPAR-1 (DB) 6 24 2 2 2
LPAR-2 (APP) 1 7 2 2 2
LPAR-3 (Extra) 1 1 2 2 2



LPAR On sys 2 :

Processor mem HBA Eth Disk
LPAR-1 (DB) 0.1 1 2 2 2
LPAR-2 (APP) 0.1 1 2 2 2
LPAR-3 (Extra) 2.8 24 2 2 2
LPAR-4 (DG) 0.5 4 2 2 2
LPAR-5 (Test) 0.5 2 2 2 2


Hacmp configuration is as follows
1) LPAR-1 of sys1 and LPAR-1 of sys2
2) LPAR-2 of sys1 and LPAR-2 of sys2

if LPAR-1 of sys1 or LPAR-2 of sys1 fail following things to be take place.

1). LPAR-5,LPAR-4 on sys 2 release 0.4 cpu each and 3 GB and 1 GB respectively.
2). LPAR-3 on sys 2 release 2.7 cpu and 23 GB mem.
3). now above free resources should be use in LPAR-1 and LPAR-2 on sys 2 in following mannger.
4). Partition Processor mem
LPAR-1 2.8 24
LPAR-2 0.9 5


now how to include above events in HACMP failover..

ritesh

[steevojb]

I think you need to look at the chapter 5 in

IBM Redbooks | Partitioning Implementations for IBM eServer p5 Servers

This sort of task is going to take some considerable development and testing

HTH

Steve