[fabiang]

Hi, I install VIOS and create a viosclient, the first issue was that i have created a tsm_vg with a 100G and stogvg_tsm with 80 G from the rootvg_client that have 1 Tera. with the following comands

mklv -lv stogvg_tsm rootvg_client 80G

mkvdev -vdev stogvg_tsm -vadapter vhost2 -dev vtsm1

then I asociated these partition to two vhost, the problem is whe i start the partition client, I have only rootvg with a disk of 10G, and is the tsm_vg i cant see stogvg_vg and I dont know where are the other 90G.-
Is there any procedure add another LV to a partition client.-

Thanks.-

Fabian