I was just going to add to the paging space with smit chps.
Will I be able to change the location even though all the PP are used in the 'inner, middle'? When I do a lsps -a I get:
Grits:root:/# lsps -a
Page Space Physical Volume Volume Group Size %Used Active Auto Type
paging01 hdisk3 rootvg 8320MB 99 yes yes lv
paging00 hdisk0 rootvg 19200MB 76 yes yes lv
paging00 hdisk2 rootvg 1024MB 76 yes yes lv
When I do a lspv I get:
Grits:root:/# lspv hdisk3
PHYSICAL VOLUME: hdisk3 VOLUME GROUP: rootvg
PV IDENTIFIER: 00c42efddb586dff VG IDENTIFIER 00c42efd00004c0000000105ba468d37
PV STATE: active
STALE PARTITIONS: 0 ALLOCATABLE: yes
PP SIZE: 128 megabyte(s) LOGICAL VOLUMES: 8
TOTAL PPs: 546 (69888 megabytes) VG DESCRIPTORS: 1
FREE PPs: 41 (5248 megabytes) HOT SPARE: no
USED PPs: 505 (64640 megabytes) MAX REQUEST: 256 kilobytes
FREE DISTRIBUTION: 00..00..00..00..41
USED DISTRIBUTION: 110..109..109..109..68
Grits:root:/# lspv hdisk0
PHYSICAL VOLUME: hdisk0 VOLUME GROUP: rootvg
PV IDENTIFIER: 00c42efde98cb4da VG IDENTIFIER 00c42efd00004c0000000105ba468d37
PV STATE: active
STALE PARTITIONS: 0 ALLOCATABLE: yes
PP SIZE: 128 megabyte(s) LOGICAL VOLUMES: 4
TOTAL PPs: 546 (69888 megabytes) VG DESCRIPTORS: 1
FREE PPs: 58 (7424 megabytes) HOT SPARE: no
USED PPs: 488 (62464 megabytes) MAX REQUEST: 256 kilobytes
FREE DISTRIBUTION: 00..00..00..00..58
USED DISTRIBUTION: 110..109..109..109..51
Grits:root:/# lspv hdisk2
PHYSICAL VOLUME: hdisk2 VOLUME GROUP: rootvg
PV IDENTIFIER: 00ca8abde9e8c37e VG IDENTIFIER 00c42efd00004c0000000105ba468d37
PV STATE: active
STALE PARTITIONS: 0 ALLOCATABLE: yes
PP SIZE: 128 megabyte(s) LOGICAL VOLUMES: 7
TOTAL PPs: 546 (69888 megabytes) VG DESCRIPTORS: 1
FREE PPs: 151 (19328 megabytes) HOT SPARE: no
USED PPs: 395 (50560 megabytes) MAX REQUEST: 256 kilobytes
FREE DISTRIBUTION: 00..00..00..42..109
USED DISTRIBUTION: 110..109..109..67..00
 |